27



Rivet Clips for Cars

Rivet clips are the two-part push clips that hold bumper covers, wheel arch liners, radiator covers, splash shields and under-trays. The body goes through the hole and the centre pin spreads the legs behind the panel. We sell them in packs of 25, sorted by make, with the head diameter, stem width and stem length listed on each product where the photo shows them.

How to pick the right rivet clip

  • Stem width: the closest match to the panel hole is the most important size.
  • Stem length: it must reach through every layer you are clamping, such as a bumper and a liner.
  • Head diameter: a bigger head spreads the load on soft plastic.

Our guide how to measure a car clip shows where to measure. If your clip has a screw in the middle rather than a push pin, it is a scrivet: see scrivet clips and rivet clips vs scrivets.

Removing old rivet clips

Lift the centre pin first with a forked trim tool, then lift the body out. Pulling the head with the pin still down is the usual way clips snap. More tips in how to remove car trim clips.

Common questions

Are rivet clips universal?

No. Two clips can look alike and still differ by a millimetre or two on the stem. Compare sizes with your old clip before you order.

Can I reuse a rivet clip?

Sometimes, if the legs and pin are not stretched or cracked. A worn clip will not hold the panel tight, so many people fit new ones. See reuse or replace car clips.

Do you have clips for my make?

Most products name the make they are listed for. Our guide finding clips for your car make explains how to search.

Car Clip Company is Australian owned. We deliver Australia-wide, checkout is through PayPal, and unused items in original packaging can be returned within 30 days (see our returns policy). Not sure which part you need? Call 0400 060 033.

**Please note colours are ONLY an example and due to photo and screen resolution may not represent the correct colour **