17



Scrivet Clips

A scrivet is a screw rivet: a plastic body that sits in the panel hole with a screw or ribbed pin through the middle. Turning or pressing the centre spreads the body and clamps the panel. Scrivets are common on bumper covers, wheel arch liners, splash guards and engine under-trays, where the panel needs to come off again later.

Scrivets vs rivet clips

A rivet clip uses a push pin. A scrivet uses a screw or a pin you can undo. If you are not sure which you have, look at the centre: a cross or slot means a screw. Our article rivet clips vs scrivets has photos of both styles.

Sizing a scrivet

Check the stem width against the hole, the stem length against the total panel thickness, and the head size against the area it needs to cover. Each product lists the sizes shown on its photo. See how to measure a car clip.

Fitting tips

Undo the centre a few turns before you pull an old scrivet. Fit the new one with the centre loose, push the body into the hole, then screw or press the centre home. Do not over-tighten into plastic. For bumpers and arch liners, see bumper, wheel arch liner and splash shield clips.

Common questions

Do scrivets need a screwdriver?

Screw-centre types do. Some scrivets have a push pin and can be fitted by hand.

Which is better, a scrivet or a rivet clip?

Use the same type the car came with. The panel hole and the clip head are designed together.

Car Clip Company is Australian owned. We deliver Australia-wide, checkout is through PayPal, and unused items in original packaging can be returned within 30 days (see our returns policy). Not sure which part you need? Call 0400 060 033.

**Please note colours are ONLY an example and due to photo and screen resolution may not represent the correct colour **